Product_CHINA JINYUE Electromechanical Co.,Ltd.

Chaoyang Road, Shangma Industrial Zone, Shitang Town, Wenling City

+0086-13758669319

sales@jinyuepump.cn

中文版

SP

Stainless steel deep well pump

List price:0.00

Price:0.00

Application1. The pump part of this product (impeller, guide vane, shaft, etc.) is made of 304 stainless steel, which is safe and environmentally friendly, and has more stable performance;2. The whole series is equipped with oil-filled motor as standard, and the diving depth exceeds 150 meters. 3. It can be widely used in villages, schools, hospitals, farms, ranches, buildings, small water plants, household water supply, water tanks, irrigation, urban factories,commercial facilities water supply, water conservancy system fountains and otherapplication scenarios. Conditions of Use1. Temperature not exceeding 40℃;2. Solid content (by weight) not exceeding 0.01%;3.pH value 6.5-8.5;4. Hydrogen sulfide content not exceeding 15mg/L, and does not contain any oil. (When used in deep wells, the wellbore should be kept vertical and no bidirectional bending is allowed)
QD

Multistage submersible pump

List price:0.00

Price:0.00

ApplicationQ(D) type dry submersible electric pump (hereinafter referred to as electric pump) consists of three parts: water pump, seal and motor. The water pump is located at the upper part of the electric pump and is a multi-stage centrifugal impeller with radial guide vane structure; the motor is located at the lower part of the electric pump and is a single-phase or three-phase asynchronous motor structure; a double-end mechanical seal is used between the water pump and the motor, and an &quot;O&quot; type oil-resistant rubber seal is used at each fixed stop seal. Conditions of Use1. The medium temperature does not exceed +40°C;2. The pH value of the medium is between 6.5 and 8.5;3. The volume ratio of solid impurities does not exceed 0.1%, and the particle size is not greater than 0.2mm;4. The diving depth does not exceed 5m;5. The power frequency is 50Hz, the voltage is single-phase AC 220V, three-phase AC 380V, and the voltage fluctuation range is ±10% of the rated value
WQAS

Cutting Sewage Sewage Pump

List price:0.00

Price:0.00

ApplicationThe cutting part of the sewage cutting pump has a unique spiral structure and a sharp blade design. Under the premise of ensuring the high efficiency of hydraulic performance and exceeding similar products, it also has a certain cutting ability to ensure the superior cutting function of waste such as straw, cotton, cloth, baby diapers, etc. after being shredded and discharged for the purpose of conveying sewage and dirt; except for special purposes; full head, low energy consumption; (according to the results of the power curvechanges in the actual test report) large flow and medium and low head use; different types of cutter discs can be replaced according to different use environments; mainly municipal type and livestock farm special type cutter discs; the cutting part is made of alloymaterial with Rockwell hardness above 48HR; special materials need to be customized in advance. Conditions of Use1. Avoid inhaling hard materials such as stones, screws and nails to extend the service life of the cutting device;2. After replacing the cutting device, pay special attention to the gap between the impeller and the cutting disc, which should be controlled between 0.1-0.25mm;3. The operating environment must be a flowable liquid with water as the main component;4. Install and use 25cm away from the bottom of the pool;5. When there is too little flowable liquid and too much slag liquid, water must be added before starting
WQ

Sewage submersible electric pump

List price:0.00

Price:0.00

ApplicationWQ cast iron sewage electric pump (iron cap) (hereinafter referred to as electric pump) complies with GB/T24674 standard. The electric pump consists of three parts: water pump, seal and motor. The motor is located at the upper part of the electric pump and is asingle-phase or three-phase asynchronous motor; the water pump is located at the lower part of the electric pump and is a channel impeller structure; the mechanical seal plus skeleton oil seal (0.551 5kw)/mechanical seal (2.27.5kw) is used as a dynamic sealbetween the water pump and the motor, and the&quot;0&quot;-shaped oil-resistant rubber seal ring is used as a static seal at the fixed stop seal of each country to ensure the reliability of the electric pump. The rotor shaft of the electric pump is made of stainless steel to ensure that the shaft has more reliable mechanical strength,which can effectively improve the wear resistance and corrosion resistance of the shaft, and it is also convenient for the maintenance and disassembly of the impeller. Conditions of Use1. The medium temperature does not exceed +40°C;2. The pH value of the medium is between 6.5 and 8.5;3. The maximum concentration of the medium is 1.2x10³Kg/m³;4. The diving depth is not less than 0.5m and not more than 5m;5. The power supply voltage and frequency are based on the parametersof the product trademark, and the voltage width does not exceed 10% of the rated voltage.
QY

Oil immersed pump

List price:0.00

Price:0.00

ApplicationQY series oil-filled submersible electric pump (hereinafter referred to as electric pump) consists of three parts: water pump, seal and motor.The water pump is located on the upper part of the electric pump and is a core-type, mixed-flow or axial-flow structure; the motor is located on the lower part of the electric pump and is an oil-filled three-phase asynchronous motor; a mechanical seal is used as a dynamic seal between the water pump and the motor, and an &quot;0&quot;-shaped oil-resistant rubber seal is used as a static seal at each fixed seal.  Conditions of Use1. The three-phase electric pump must not be used without a phase, please install overcurrent and leakage protectors;2. The temperature of the conveying medium is less than +40°C, and the medium pH value is between 6.5and 8.5;3. The solid impurity ratio in the water does not exceed 0.1% and the particle size is not greater than0.2mm;4. The electric pump should be used within an appropriate range near the rated head. The working head cannot be lower than 85% of the rated head. If it is lower than this, it is easy to cause the thermal protector to work, causing the electric pump to stop running and affecting normal use;5. The power frequency is 50Hz, and the voltage range is between 342-420V.