Application

The cutting part of the sewage cutting pump has a unique spiral structure and a sharp blade design. Under the premise of ensuring the high efficiency of hydraulic performance and exceeding similar products, it also has a certain cutting ability to ensure the superior cutting function of waste such as straw, cotton, cloth, baby diapers, etc. after being shredded and discharged for the purpose of conveying sewage and dirt; except for special purposes; full head, low energy consumption; (according to the results of the power curve

changes in the actual test report) large flow and medium and low head use; different types of cutter discs can be replaced according to different use environments; mainly municipal type and livestock farm special type cutter discs; the cutting part is made of alloy

material with Rockwell hardness above 48HR; special materials need to be customized in advance.

Conditions of Use

1. Avoid inhaling hard materials such as stones, screws and nails to extend the service life of the cutting device;

2. After replacing the cutting device, pay special attention to the gap between the impeller and the cutting disc, which should be controlled between 0.1-0.25mm;

3. The operating environment must be a flowable liquid with water as the main component;

4. Install and use 25cm away from the bottom of the pool;

5. When there is too little flowable liquid and too much slag liquid, water must be added before starting